Meny
Y-Block for jetting second and third cable.
Y-Block for jetting second and third cable. Max 16 mm and max 12 mm. Supplied with 32 mm and 40 mm clamps as standard. Addition for further sizes is possible. A 25 mm pipe is connected between fibre blowing machine and Y block. Special UK version is available. Contact us for more info!
After Blower for V1 clamps
After Blower for V1 duct clamps. Robust handheld fibre blowing unit. Hand powered operation. Art no 18003.
Air connection: Std claw 1” European quick connector
Max pressure: 16 Bar
Cable diameter: 1 – 16 mm
Duct diameter: 7 – 50 mm
Weight: approx. 0,5 kg
After Blower for V3 duct clamps
After Blower for V3 duct clamps. Robust handheld fibre blowing unit. Hand powered operation. Art.no: 18005
Air connection: Std claw 1” European quick connector
Max pressure: 16 Bar
Cable diameter: 4 – 40 mm
Duct diameter: 10 – 63 mm
Weight: approx. 0,5 kg
Rubberized respectively toothed drive wheel for fibre.
Drive belts for different conditions.
Cable seals in different sizes.
Brass cable heads.
Threaded cable heads are available in the sizes:
2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0 8,5 9,0 9,5 10 16
Unthreaded (pinched in place) cable heads are available in the sizes:
1,8 2,0
Duct lubrication for ducts up to 16/12 mm.
Cleaning & lubrication – AVOID TROUBLE – do it right from the beginning!
You use the lubrication together with cleaning sponges by blowing them through the duct for lubrication AND cleaning. If you do this step carefully, you will avoid worries and gain a lot of time. By looking at the sponge, you can determine if more sponges need to be blown through. The lubricant also reduces static electricity!
Duct lubrication for ducts greater than 16/12 mm.
Cleaning & lubrication – AVOID TROUBLE – do it right from the beginning!
You use the lubrication together with cleaning sponges by blowing them through the duct for lubrication AND cleaning. If you do this step carefully, you will avoid worries and gain a lot of time. By looking at the plug, you can determine if more plugs need to be blown through. The lubricant also reduces static electricity!
Cleaning sponges for duct.
Cleaning & lubricantion – AVOID TROUBLE – do it right from the beginning!
You use the lubrication together with purging plugs by blowing them through cloth or pipe for lubrication AND cleaning. If you do this step carefully, you will avoid worries and gain a lot of time. By looking at the plug, you can determine if more plugs need to be blown through.
Available for all sizes of duct and pipes.
To be mounted on the cable reel for smoother fibre feed from the reel
To be mounted on the cable reel for smoother fibre feed from the reel, and for better ergonomics.
Max 1200 mm / 150 kg.
L120 x B70 x H10
Weight 10kg
Collapsible for smoother transport.
Tools for cutting duct 90 degrees
Tools for cutting duct 90 degrees in order to avoid stops in duct connectors
Micro Duct Cutter for ducts upp to 16mm. Art.no MDC-16.
Duct Cutter for ducts up to 42mm. Art.no PC-42. Spare blades for PC-42. Art.no PCB-42.
